ARM Tools for writing disk images ================================= arm-image-installer ------------------- This script will automate the process of preparing a Fedora ARM disk image for use with various hardware targets. - Write the selected disk image to media (optional) - customize media with platform specific U-Boot file(s) - Turn SE Linux on and off - Remove the root password - Update U-Boot for another Target To add additional support, create a code snippet file (bash script) in the "boards.d" subdirectory with the commands needed to write U-Boot for the target board. Usage: arm-image-installer <options> --image=IMAGE - xz compressed image file name --target=TARGET - target board [Bananapi|beaglebone|Cubieboard|Cubieboard2|Cubietruck|Mele_A1000|Mele_A1000G|panda|trimslice|wandboard_dual|wandboard_quad|wandboard_solo] --media=DEVICE - media device file (/dev/[sdX|mmcblkX]) --selinux=ON/OFF - Turn SELinux off/on as needed --norootpass - Remove the root password -y - Assumes yes, will not wait for confirmation --version - Display version and exit Example: arm-image-installer --image=Fedora-Rawhide.xz --target=panda --media=/dev/mmcblk0 --selinux=OFF update-uboot ------------ Update to a new u-boot on a disk image from a local host install. Optionally download a specified newer u-boot from koji by specifying a koji tag. Usage: update-uboot <options> --target=TARGET - target board [Bananapi|beaglebone|Cubieboard|Cubieboard2|Cubietruck|Mele_A1000|Mele_A1000G|panda|trimslice|wandboard_dual|wandboard_quad|wandboard_solo] --media=DEVICE - media device file (/dev/[sdX|mmcblkX]) --tag=KOJI TAG - koji tag (Default is f22. f21, f21-updates etc..) Example: update-uboot --target=panda --media=/dev/mmcblk0