Hi
I updated from 5.17.9-302.fsync.fc36 to 5.17.11-301.fsync.fc36 and then 5.17.12-301.fsync.fc36, but it wont boot past "amdgpu: Topology: Add CPU node"
5.17.9-302.fsync.fc36 still boots fine
Any more system information you can provide? What Hardware? Does the same happen on the Fedora Kernel?
I am not using the stock Fedora kernel, I think it is excluded from updating to it.
Operating System: Fedora Linux 36 KDE Plasma Version: 5.24.5 KDE Frameworks Version: 5.93.0 Qt Version: 5.15.3 Kernel Version: 5.17.9-302.fsync.fc36.x86_64 (64-bit) Graphics Platform: Wayland Processors: 16 × AMD Ryzen 7 3700X 8-Core Processor Memory: 15.6 GiB of RAM Graphics Processor: AMD Radeon RX 6600 XT
/sys/kernel/debug/dri/0/amdgpu_firmware_info VCE feature version: 0, firmware version: 0x00000000 UVD feature version: 0, firmware version: 0x00000000 MC feature version: 0, firmware version: 0x00000000 ME feature version: 41, firmware version: 0x00000040 PFP feature version: 41, firmware version: 0x0000005b CE feature version: 41, firmware version: 0x00000024 RLC feature version: 1, firmware version: 0x00000056 RLC SRLC feature version: 0, firmware version: 0x00000000 RLC SRLG feature version: 0, firmware version: 0x00000000 RLC SRLS feature version: 0, firmware version: 0x00000000 MEC feature version: 41, firmware version: 0x0000005e MEC2 feature version: 41, firmware version: 0x0000005e SOS feature version: 0, firmware version: 0x00230009 ASD feature version: 553648242, firmware version: 0x21000072 TA XGMI feature version: 0x00000000, firmware version: 0x00000000 TA RAS feature version: 0x00000000, firmware version: 0x00000000 TA HDCP feature version: 0x00000000, firmware version: 0x17000028 TA DTM feature version: 0x00000000, firmware version: 0x1200000e TA RAP feature version: 0x00000000, firmware version: 0x0700000e TA SECUREDISPLAY feature version: 0x00000000, firmware version: 0x00000000 SMC feature version: 0, firmware version: 0x003b2800 (59.40.0) SDMA0 feature version: 52, firmware version: 0x0000004b SDMA1 feature version: 52, firmware version: 0x0000004b VCN feature version: 0, firmware version: 0x0211200e DMCU feature version: 0, firmware version: 0x00000000 DMCUB feature version: 0, firmware version: 0x0202000c TOC feature version: 0, firmware version: 0x00000000 VBIOS version: 115-D532BP0-100
lspci |grep -i vga 09:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 23 [Radeon RX 6600/6600 XT/6600M] (rev c1)
on 5.17.9-302.fsync.fc36.x86_64 dmesg | grep -i amdgpu [ 0.000000] Command line: BOOT_IMAGE=(hd3,gpt2)/boot/vmlinuz-5.17.9-302.fsync.fc36.x86_64 root=UUID=42fff640-0839-4432-9df3-2b54e16580f8 ro rhgb quiet selinux=0 amdgpu.ppfeaturemask=0xffffffff [ 0.049462] Kernel command line: BOOT_IMAGE=(hd3,gpt2)/boot/vmlinuz-5.17.9-302.fsync.fc36.x86_64 root=UUID=42fff640-0839-4432-9df3-2b54e16580f8 ro rhgb quiet selinux=0 amdgpu.ppfeaturemask=0xffffffff [ 3.579073] [drm] amdgpu kernel modesetting enabled. [ 3.582680] amdgpu: Ignoring ACPI CRAT on non-APU system [ 3.582684] amdgpu: Virtual CRAT table created for CPU [ 3.582690] amdgpu: Topology: Add CPU node [ 3.601922] amdgpu 0000:09:00.0: vgaarb: deactivate vga console [ 3.601957] amdgpu 0000:09:00.0: enabling device (0006 -> 0007) [ 3.601987] amdgpu 0000:09:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 3.604016] amdgpu 0000:09:00.0: amdgpu: Fetched VBIOS from VFCT [ 3.604017] amdgpu: ATOM BIOS: 115-D532BP0-100 [ 3.604053] amdgpu 0000:09:00.0: amdgpu: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used) [ 3.604055] amdgpu 0000:09:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [ 3.604056] amdgpu 0000:09:00.0: amdgpu: AGP: 267894784M 0x0000008400000000 - 0x0000FFFFFFFFFFFF [ 3.604101] [drm] amdgpu: 8176M of VRAM memory ready [ 3.604102] [drm] amdgpu: 8176M of GTT memory ready. [ 3.608833] amdgpu 0000:09:00.0: amdgpu: PSP runtime database doesn't exist [ 5.413030] amdgpu 0000:09:00.0: amdgpu: STB initialized to 2048 entries [ 5.448627] amdgpu 0000:09:00.0: amdgpu: Will use PSP to load VCN firmware [ 5.644693] amdgpu 0000:09:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 5.666803] amdgpu 0000:09:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available [ 5.666823] amdgpu 0000:09:00.0: amdgpu: smu driver if version = 0x0000000f, smu fw if version = 0x00000013, smu fw version = 0x003b2800 (59.40.0) [ 5.666826] amdgpu 0000:09:00.0: amdgpu: SMU driver if version not matched [ 5.666830] amdgpu 0000:09:00.0: amdgpu: use vbios provided pptable [ 5.712517] amdgpu 0000:09:00.0: amdgpu: SMU is initialized successfully! [ 6.009185] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 6.035104] amdgpu: HMM registered 8176MB device memory [ 6.035158] amdgpu: SRAT table not found [ 6.035158] amdgpu: Virtual CRAT table created for GPU [ 6.035242] amdgpu: Topology: Add dGPU node [0x73ff:0x1002] [ 6.035245] kfd kfd: amdgpu: added device 1002:73ff [ 6.035264] amdgpu 0000:09:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 8, active_cu_number 32 [ 6.035314] amdgpu 0000:09:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0 [ 6.035316] amdgpu 0000:09:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 6.035316] amdgpu 0000:09:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 6.035317] amdgpu 0000:09:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 6.035318] amdgpu 0000:09:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 6.035319] amdgpu 0000:09:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 6.035319] amdgpu 0000:09:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 6.035320] amdgpu 0000:09:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 6.035321] amdgpu 0000:09:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 6.035322] amdgpu 0000:09:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 6.035322] amdgpu 0000:09:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0 [ 6.035323] amdgpu 0000:09:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0 [ 6.035324] amdgpu 0000:09:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 1 [ 6.035325] amdgpu 0000:09:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 1 [ 6.035326] amdgpu 0000:09:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 1 [ 6.035326] amdgpu 0000:09:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1 [ 6.036181] amdgpu 0000:09:00.0: amdgpu: Using BACO for runtime pm [ 6.036602] [drm] Initialized amdgpu 3.44.0 20150101 for 0000:09:00.0 on minor 0 [ 6.040766] fbcon: amdgpudrmfb (fb0) is primary device [ 6.040768] amdgpu 0000:09:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 7.720766] snd_hda_intel 0000:09:00.1: bound 0000:09:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
Hmmm the commit for 5.17.11 (665aa4e) introduced nothing relating to amdgpu so this could very well be a problem with the stock kernel.
I can only suggest that you try the Fedora Kernel and see if the same occurs
I've looked into it a bit further and might have found something that caused this.
I've uploaded a kernel build that might have fixed the issue under https://copr.fedorainfracloud.org/coprs/sentry/kernel-fsync-test/
After lots of testing, and eventually uninstalling all but 5.17.9-302.fsync.fc36, I could eventually update to 5.17.12-301.fsync.fc36 and it is booting fine!
Metadata Update from @sentry: - Issue close_status updated to: Fixed - Issue status updated to: Closed (was: Open)
Login to comment on this ticket.