From 7bb9062fd7f0ee92a1faa3e11d04b171f7535152 Mon Sep 17 00:00:00 2001 From: Max Fiedler Date: Sep 21 2022 13:27:20 +0000 Subject: Correct some misspellings --- diff --git a/docs/modules/ROOT/pages/server-installation-sbc.adoc b/docs/modules/ROOT/pages/server-installation-sbc.adoc index adccead..14b569f 100644 --- a/docs/modules/ROOT/pages/server-installation-sbc.adoc +++ b/docs/modules/ROOT/pages/server-installation-sbc.adoc @@ -180,7 +180,7 @@ Directly at a terminal of the SBC we will make only the minimal, absolutely nece 2. Connect monitor, keyboard and network cable, insert the micro SD card. 3. Connect Raspberry Pi to power and wait. After some time you will be greeted by a very plain configuration screen. 4. If you have a DHCP server on your LAN the only strictly necessary action is to configure root password. Type "4" and enter a suitable password. If you are on a non-US keyboard you should restrict yourself to traditional ASCII and avoid special characters for now. Otherwise, you might later not be able to enter the root password correctly, because a different keyboard mapping applies. In the next stage, with correct mapping, you can set up the password as complex as you like. -5. Ich you don't have a DHCP server on your LAN type "3" and fill in your hostname and your network details. +5. If you don't have a DHCP server on your LAN type "3" and fill in your hostname and your network details. 6. Tap "c" to continue and finalize the configuration. After some waiting, the Fedora Server login prompt appears. + [IMPORTANT] @@ -192,7 +192,7 @@ Always complete this step and close with 'c'. Otherwise this installation routin === Final Configuration -1. On your desktop open a Browser and enter name and port __http://fedora:9090__. Sometimes the internal DNS already work. If not, use the IP address you wrote down, e.g. something like __http://192.168.158.116:9090__. After accepting a warning message due to a missing certificate, voilà, the Cockpit administration interface of the Raspberry Pi appears. +1. On your desktop open a Browser and enter name and port __http://fedora:9090__. Sometimes the internal DNS already works. If not, use the IP address you wrote down, e.g. something like __http://192.168.158.116:9090__. After accepting a warning message due to a missing certificate, voilà, the Cockpit administration interface of the Raspberry Pi appears. + image::serverinstall-sbc-020.png[Cockpit Login Screen] @@ -214,7 +214,7 @@ Select "accounts" in the left navigation column and choose the root account. At + If you chose a simple password during the basic installation, you should replace it with a more complex one at this occasion. -6. If you are non-US you may want to **set your language**. In any case, you should choose the **keyboard layout** correctly. Otherwiese, in case of an emergency you may have to use a directly attached monitor and keyboard again, you need a correct mapping to act efficiently. +6. If you are non-US you may want to **set your language**. In any case, you should choose the **keyboard layout** correctly. Otherwise, in case of an emergency you may have to use a directly attached monitor and keyboard again, you need a correct mapping to act efficiently. + Select "Terminal" in the left navigation menu. You get a terminal access to your device, already logged in as root. +