From 4d9a38cb65e65a25e36a743d7bbf9acb323ae737 Mon Sep 17 00:00:00 2001 From: Josseline Perdomo Date: Apr 07 2021 00:29:46 +0000 Subject: Fixed reference to InstallingAnaconda sections --- diff --git a/modules/install-guide/pages/_partials/install/CustomSpoke.adoc b/modules/install-guide/pages/_partials/install/CustomSpoke.adoc index 91fac7d..726396e 100644 --- a/modules/install-guide/pages/_partials/install/CustomSpoke.adoc +++ b/modules/install-guide/pages/_partials/install/CustomSpoke.adoc @@ -13,7 +13,7 @@ In most other installers for both Linux and other operating systems, disk partit [NOTE] ==== -No permanent changes will be made to your disks during the actual partitioning process. The configuration you have selected will only be written to your system after you press the `Begin installation` button in xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. +No permanent changes will be made to your disks during the actual partitioning process. The configuration you have selected will only be written to your system after you press the `Begin installation` button in xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. ==== @@ -23,7 +23,7 @@ image::anaconda/CustomSpoke.png[The Manual Partitioning screen. At this point, n When you first open the `Manual Partitioning` screen, the column on the left side will display all previously existing partitions on all drives which you selected as installation targers in xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-storage-partitioning[Installation Destination]. If none of the selected drives contain any existing partitions, then a message informing you that no mount points currently exist will appear. -Here, you can choose a partitioning scheme such as `LVM` or `BTRFS` and click the `Click here to create them automatically` to prompt the installer to create a basic partitioning layout; this layout follows the guidelines described in xref:Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning-recommended[Recommended Partitioning Scheme]. The created layout is a basic layout where partition/volume sizes are determined automatically based on the total amount of available space. +Here, you can choose a partitioning scheme such as `LVM` or `BTRFS` and click the `Click here to create them automatically` to prompt the installer to create a basic partitioning layout; this layout follows the guidelines described in xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning-recommended[Recommended Partitioning Scheme]. The created layout is a basic layout where partition/volume sizes are determined automatically based on the total amount of available space. Click the `+` button to add a mount point. In the dialog window that opens, choose a mount point such as `/` or `/home`, and the desired capacity for the mount point (such as `10GB` or `500MB`). Note that specifying the mount point is mandatory, but you do not have to specify the capacity at this point; this is useful when adding a mount point which you want to make larger than the current available space permits. Then, click `Add mount point` to add it to the list using the default settings, which means it will be created as a logical volume, and a new volume group will be created for it unless one already exists. @@ -32,13 +32,13 @@ Then, select the newly created mount point in the list on the left side. A set o [NOTE] ==== -For a description of available device and file system types, see xref:Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning-filesystems[Device, File System and RAID Types]. +For a description of available device and file system types, see xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning-filesystems[Device, File System and RAID Types]. ==== To remove a mount point, select it in the list and press the `-` button below. -The exact steps for configuring your storage depend on your specific needs and your system configuration. Procedures for creating specific layouts are described further in this chapter. Before you start, you should also review xref:Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning-recommended[Recommended Partitioning Scheme] and xref:Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning-advice[Advice on Partitions] for a list of requirements and tips for partitioning your disks for {PRODUCT}. +The exact steps for configuring your storage depend on your specific needs and your system configuration. Procedures for creating specific layouts are described further in this chapter. Before you start, you should also review xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning-recommended[Recommended Partitioning Scheme] and xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning-advice[Advice on Partitions] for a list of requirements and tips for partitioning your disks for {PRODUCT}. Below the list of existing mount points are two fields, showing you how much free space is left on your storage devices and how much total space they have. @@ -56,7 +56,7 @@ After you finish configuring your system storage, press `Done` in the top left c If such a message is displayed, go back and fix any issues found by the installer; otherwise you will not be able to proceed with the installation. You can also press `Done` again to return to the `Installation Summary` anyway, but a storage configuration error will prevent you from starting the actual installation process. -If no error message is displayed and if you made any changes since the last time you have visited this screen, a summary dialog will appear, displaying a detailed list of the changes you made. Review the list and click `Accept Changes` to proceed with xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary], or click `Cancel & Return to Custom Partitioning` if you want to make any more changes. +If no error message is displayed and if you made any changes since the last time you have visited this screen, a summary dialog will appear, displaying a detailed list of the changes you made. Review the list and click `Accept Changes` to proceed with xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary], or click `Cancel & Return to Custom Partitioning` if you want to make any more changes. include::{partialsdir}/install/CustomSpoke_AddPhysical.adoc[] diff --git a/modules/install-guide/pages/_partials/install/DateTimeSpoke.adoc b/modules/install-guide/pages/_partials/install/DateTimeSpoke.adoc index 623922b..869e25c 100644 --- a/modules/install-guide/pages/_partials/install/DateTimeSpoke.adoc +++ b/modules/install-guide/pages/_partials/install/DateTimeSpoke.adoc @@ -4,7 +4,7 @@ [[sect-installation-gui-date-and-time]] === Date & Time -The `Date & Time` screen allows you to configure time and date-related settings for your system. This screen is automatically configured based on the settings you selected in xref:Installing_Using_Anaconda.adoc#sect-installation-gui-welcome[Welcome Screen and Language Selection], but you can change your date, time and location settings before you begin the installation. +The `Date & Time` screen allows you to configure time and date-related settings for your system. This screen is automatically configured based on the settings you selected in xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-welcome[Welcome Screen and Language Selection], but you can change your date, time and location settings before you begin the installation. .Date & Time @@ -29,4 +29,4 @@ image::anaconda/DateTimeSpoke_AddNTP.png[A dialog window allowing you to add or If you disable network time synchronization, the controls at the bottom of the screen will become active, and you will be able to set the current time and date manually. -After configuring your time and date settings, press the `Done` button in the top left corner to return to xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. +After configuring your time and date settings, press the `Done` button in the top left corner to return to xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. diff --git a/modules/install-guide/pages/_partials/install/FilterSpoke.adoc b/modules/install-guide/pages/_partials/install/FilterSpoke.adoc index 60db7a3..aac6a1d 100644 --- a/modules/install-guide/pages/_partials/install/FilterSpoke.adoc +++ b/modules/install-guide/pages/_partials/install/FilterSpoke.adoc @@ -19,7 +19,7 @@ image::anaconda/FilterSpoke.png[A list of currently configured network storage d The screen contains a list of all currently available (discovered) network storage devices. When the screen is opened for the first time, the list will be empty in most cases because no network storage has been discovered - the installer makes no attempt at discovering this unless you configure network disks using a Kickstart file. -To add one or more storage devices to the screen so you can search them and use them in the installation, click `Add iSCSI Target` or `Add FCoE SAN` in the bottom right corner of the screen, and follow the instructions in xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-destination-add-iscsi[Add iSCSI Target] or xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-destination-add-fcoe[Add FCoE SAN], depending on which type of network storage you want to add. +To add one or more storage devices to the screen so you can search them and use them in the installation, click `Add iSCSI Target` or `Add FCoE SAN` in the bottom right corner of the screen, and follow the instructions in xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-destination-add-iscsi[Add iSCSI Target] or xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-destination-add-fcoe[Add FCoE SAN], depending on which type of network storage you want to add. Network storage devices successfully discovered and configured by the installer will then be displayed in the main list, along with identifying information such as `Name`, `WWID`, `Model` and `Target`. To sort the list by a specific column (for example `WWID`), click the column's heading. diff --git a/modules/install-guide/pages/_partials/install/KdumpSpoke.adoc b/modules/install-guide/pages/_partials/install/KdumpSpoke.adoc index f49c71f..972072d 100644 --- a/modules/install-guide/pages/_partials/install/KdumpSpoke.adoc +++ b/modules/install-guide/pages/_partials/install/KdumpSpoke.adoc @@ -31,4 +31,4 @@ Additional settings, such as the location where kernel crash dumps will be saved ==== -After configuring [application]*Kdump* settings, click btn:[Done] in the top left corner to return to xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. +After configuring [application]*Kdump* settings, click btn:[Done] in the top left corner to return to xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. diff --git a/modules/install-guide/pages/_partials/install/KeyboardSpoke.adoc b/modules/install-guide/pages/_partials/install/KeyboardSpoke.adoc index f027353..8b656da 100644 --- a/modules/install-guide/pages/_partials/install/KeyboardSpoke.adoc +++ b/modules/install-guide/pages/_partials/install/KeyboardSpoke.adoc @@ -4,7 +4,7 @@ [[sect-installation-gui-keyboard-layout]] === Keyboard Layout -The `Keyboard Layout` screen allows you to set up one or more keyboard layouts for your system and a way to switch between them. One keyboard layout is configured automatically based on your selection in xref:Installing_Using_Anaconda.adoc#sect-installation-gui-welcome[Welcome Screen and Language Selection], but you can change this layout and add additional ones before you begin the installation. +The `Keyboard Layout` screen allows you to set up one or more keyboard layouts for your system and a way to switch between them. One keyboard layout is configured automatically based on your selection in xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-welcome[Welcome Screen and Language Selection], but you can change this layout and add additional ones before you begin the installation. Keyboard layouts are a separate setting from system languages, and these two settings can be mixed as you see fit. @@ -42,4 +42,4 @@ If you use a layout that cannot accept Latin characters, such as `Russian`, you You can also optionally configure a keyboard switch which can be used to cycle between available layouts. To do so, click the `Options` button on the right side of the screen. The `Layout Switching Options` dialog will open, allowing you to configure one or more keys or key combinations for switching. Select one or more key combinations using the check boxes next to them, and click `OK` to confirm your selection. -After you finish configuring keyboard layouts and switches, click `Done` in the top left corner to return to xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. \ No newline at end of file +After you finish configuring keyboard layouts and switches, click `Done` in the top left corner to return to xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. \ No newline at end of file diff --git a/modules/install-guide/pages/_partials/install/LangSupportSpoke.adoc b/modules/install-guide/pages/_partials/install/LangSupportSpoke.adoc index e762de4..28ce703 100644 --- a/modules/install-guide/pages/_partials/install/LangSupportSpoke.adoc +++ b/modules/install-guide/pages/_partials/install/LangSupportSpoke.adoc @@ -4,14 +4,14 @@ [[sect-installation-gui-language-support]] === Language Support -The `Language Support` screen allows you to configure language settings for your system. The default language is determined by your selection in xref:Installing_Using_Anaconda.adoc#sect-installation-gui-welcome[Welcome Screen and Language Selection] and support for this language can not be removed. You can only add additional languages, which will be available on the installed system - not during the installation. +The `Language Support` screen allows you to configure language settings for your system. The default language is determined by your selection in xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-welcome[Welcome Screen and Language Selection] and support for this language can not be removed. You can only add additional languages, which will be available on the installed system - not during the installation. -If you want to change the default language, or the language used during the installation, you must reboot your system, start the installer again, and select a different language in xref:Installing_Using_Anaconda.adoc#sect-installation-gui-welcome[Welcome Screen and Language Selection]. +If you want to change the default language, or the language used during the installation, you must reboot your system, start the installer again, and select a different language in xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-welcome[Welcome Screen and Language Selection]. [NOTE] ==== -Adding support for another language does not automatically configure the corresponding keyboard layout. Layouts are a separate setting configured in xref:Installing_Using_Anaconda.adoc#sect-installation-gui-keyboard-layout[Keyboard Layout]. +Adding support for another language does not automatically configure the corresponding keyboard layout. Layouts are a separate setting configured in xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-keyboard-layout[Keyboard Layout]. ==== @@ -30,4 +30,4 @@ Enabling support for some languages (typically languages which use non-Latin scr ==== -Once you have made your selections, click `Done` in the top left corner to return to xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. \ No newline at end of file +Once you have made your selections, click `Done` in the top left corner to return to xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. \ No newline at end of file diff --git a/modules/install-guide/pages/_partials/install/PasswordSpoke.adoc b/modules/install-guide/pages/_partials/install/PasswordSpoke.adoc index 5d51de3..8bba50b 100644 --- a/modules/install-guide/pages/_partials/install/PasswordSpoke.adoc +++ b/modules/install-guide/pages/_partials/install/PasswordSpoke.adoc @@ -5,7 +5,7 @@ The `Root Password` screen is used to configure the `root` password for your system. This password will be used to log into the administrator (also known as superuser) account, which is used for system administration tasks such as installing and updating software packages and changing system-wide configuration such as network and firewall settings, storage options and adding or modifying users, groups and file permissions. -The `root` account will always be created during the installation. However, you should always also create a normal user account in xref:Installing_Using_Anaconda.adoc#sect-installation-gui-create-user[Create User] and use that account to log in to the system. Only switch to the administrator account only when you need to perform a task which requires administrator access. +The `root` account will always be created during the installation. However, you should always also create a normal user account in xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-create-user[Create User] and use that account to log in to the system. Only switch to the administrator account only when you need to perform a task which requires administrator access. [WARNING] ==== @@ -29,4 +29,4 @@ As you enter the password, it will be evaluated and the installer will determine If a message similar to the above appears, it is highly recommended to choose a different, stronger password. -Once you configure the superuser password, click `Done` in the top left corner to return to xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-progress[Configuration and Installation Progress]. If you selected a weak password, you must press the button twice. +Once you configure the superuser password, click `Done` in the top left corner to return to xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-progress[Configuration and Installation Progress]. If you selected a weak password, you must press the button twice. diff --git a/modules/install-guide/pages/_partials/install/ProgressHub.adoc b/modules/install-guide/pages/_partials/install/ProgressHub.adoc index 87b5645..a27311c 100644 --- a/modules/install-guide/pages/_partials/install/ProgressHub.adoc +++ b/modules/install-guide/pages/_partials/install/ProgressHub.adoc @@ -3,7 +3,7 @@ [[sect-installation-gui-installation-progress]] === Installation Progress -The `Installation Progress` screen is displayed after you finish configuring all required items in xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary] and press the `Begin installation` button. After this point, the installation process actually starts and changes are being made to your selected disks. It is not possible to go back to the `Installation Summary` and change any settings configured there; if you need to do so, you must wait for the installation process to finish, reboot your system, log in and change your settings on the installed system. +The `Installation Progress` screen is displayed after you finish configuring all required items in xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary] and press the `Begin installation` button. After this point, the installation process actually starts and changes are being made to your selected disks. It is not possible to go back to the `Installation Summary` and change any settings configured there; if you need to do so, you must wait for the installation process to finish, reboot your system, log in and change your settings on the installed system. .Installation Progress diff --git a/modules/install-guide/pages/_partials/install/SoftwareSpoke.adoc b/modules/install-guide/pages/_partials/install/SoftwareSpoke.adoc index d8bf254..e86b097 100644 --- a/modules/install-guide/pages/_partials/install/SoftwareSpoke.adoc +++ b/modules/install-guide/pages/_partials/install/SoftwareSpoke.adoc @@ -6,7 +6,7 @@ The `Software Selection` screen allows you to choose a _Base Environment_ and _Add-ons_. These options control which software packages will be installed on your system during the installation process. -This screen is only available if xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-source[Installation Source] is properly configured and only after the installer has downloaded package metadata from the source. +This screen is only available if xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-source[Installation Source] is properly configured and only after the installer has downloaded package metadata from the source. [NOTE] ==== @@ -27,4 +27,4 @@ The list of add-ons is divided into two parts by a horizontal line. Add-ons abov Environments and add-ons are defined using a `comps.xml` file in your installation source (for example, in the `repodata/` directory on the full Fedora{nbsp}Server installation DVD). Review this file to see exactly which packages will be installed as part of a certain environment or add-on. For more information about the `comps.xml` file, see xref:appendixes/Kickstart_Syntax_Reference.adoc#sect-kickstart-packages[%packages (required) - Package Selection]. -After you finish configuring your software selection, click `Done` in the top left corner to return to xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. +After you finish configuring your software selection, click `Done` in the top left corner to return to xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. diff --git a/modules/install-guide/pages/_partials/install/SourceSpoke.adoc b/modules/install-guide/pages/_partials/install/SourceSpoke.adoc index 0aaa4c7..3a2cb98 100644 --- a/modules/install-guide/pages/_partials/install/SourceSpoke.adoc +++ b/modules/install-guide/pages/_partials/install/SourceSpoke.adoc @@ -51,4 +51,4 @@ To add a repository, click the btn:[+] button. To delete a repository, select on You can name your additional repository and configure it the same way as the primary repository on the network using the input fields on the right side of the section. -Once you have selected your installation source, click `Done` in the top left corner to return to xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. +Once you have selected your installation source, click `Done` in the top left corner to return to xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. diff --git a/modules/install-guide/pages/_partials/install/StorageSpoke.adoc b/modules/install-guide/pages/_partials/install/StorageSpoke.adoc index 956bf65..f0f4d00 100644 --- a/modules/install-guide/pages/_partials/install/StorageSpoke.adoc +++ b/modules/install-guide/pages/_partials/install/StorageSpoke.adoc @@ -5,7 +5,7 @@ The `Installation Destination` screen allows you to configure storage options - namely, which disks will be used as the installation target for your {PRODUCT} installation. At least one disk must always be selected for the installation to proceed. -For information about the theory and concepts behind disk partitioning in Linux, see xref:Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning-recommended[Recommended Partitioning Scheme]. +For information about the theory and concepts behind disk partitioning in Linux, see xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning-recommended[Recommended Partitioning Scheme]. [WARNING] ==== @@ -22,7 +22,7 @@ In the top part of the screen, all locally available storage devices (SATA, IDE If you need to configure additional local storage devices, select `Refresh` on the lower-right corner. Follow the instructions in the dialog that opens. All detected disks, including any new ones, will be displayed in the `Local Standard Disks` section. -The `Specialized & Network Disks` section below shows advanced network storage (such as iSCSI and FCoE disks) currently configured. When you first open this screen, no such devices will be displayed because they can not be automatically detected; to search for network storage devices, press `Add a disk` button and proceed with xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-destination[Installation Destination - Specialized & Network Disks]. Any network storage you configure will then show up in the `Specialized & Network Disks` the same way local disks are shown above. +The `Specialized & Network Disks` section below shows advanced network storage (such as iSCSI and FCoE disks) currently configured. When you first open this screen, no such devices will be displayed because they can not be automatically detected; to search for network storage devices, press `Add a disk` button and proceed with xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-destination[Installation Destination - Specialized & Network Disks]. Any network storage you configure will then show up in the `Specialized & Network Disks` the same way local disks are shown above. All storage devices which will be used to install {PRODUCT} have a black circle icon with a white check mark on them. Disks not marked by this icon will not be used during the installation - they will be ignored if you choose automatic partitioning, and they will not be available in manual partitioning. @@ -43,7 +43,7 @@ After you select all disks you want to install {PRODUCT}, select one of the thre + With automatic partitioning, you can also select the `I would like to make additional space available` option below. Use this option if you want to reclaim space from an existing partitioning layout - for example, if a disk you want to use already contains a different operating system, and you want to make this system's partitions smaller to allow more room for {PRODUCT}. The `Reclaim space` dialog which opens if this option is selected is described later in this section. -* `Custom` - Select this option and press `Done` in the top left corner of the screen to configure your system's partitioning layout semi-manually. This requires some knowledge of the theory behind disk partitions and related concepts, but provides recommendations over the way the system will be installed. For instructions for Custom partitioning, see xref:Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning[Manual Partitioning]. +* `Custom` - Select this option and press `Done` in the top left corner of the screen to configure your system's partitioning layout semi-manually. This requires some knowledge of the theory behind disk partitions and related concepts, but provides recommendations over the way the system will be installed. For instructions for Custom partitioning, see xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning[Manual Partitioning]. * `Advanced-Custom (Blivet-GUI)` - Select this option and press `Done` in the top left corner of the screen to configure your system's partitioning completely manually. This requires advanced knowledge of the theory behind disk partitions and related concepts. There are no guardrails. @@ -78,10 +78,10 @@ After you free enough space for your {PRODUCT} installation, press `Reclaim spac [NOTE] ==== -No changes to any disks will be made until you press `Begin Installation` in xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. The `Reclaim Space` dialog only *marks* partitions for resizing or deletion, but no such action is performed immediately. +No changes to any disks will be made until you press `Begin Installation` in xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. The `Reclaim Space` dialog only *marks* partitions for resizing or deletion, but no such action is performed immediately. ==== -* If you selected the `Custom` option, pressing `Done` will open the `Manual Partitioning` screen. See xref:Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning[Manual Partitioning] for further instructions. +* If you selected the `Custom` option, pressing `Done` will open the `Manual Partitioning` screen. See xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-manual-partitioning[Manual Partitioning] for further instructions. include::{partialsdir}/install/StorageSpoke_BootLoader.adoc[] diff --git a/modules/install-guide/pages/_partials/install/SummaryHub.adoc b/modules/install-guide/pages/_partials/install/SummaryHub.adoc index f029d8d..3e34670 100644 --- a/modules/install-guide/pages/_partials/install/SummaryHub.adoc +++ b/modules/install-guide/pages/_partials/install/SummaryHub.adoc @@ -37,4 +37,4 @@ Each screen also has an explanatory text below its title, showing settings curre image::anaconda/SummaryHub_Mouseover.png[An entry in the Installation Summary shows a truncated description and a tooltip with full text.] -Once you configure everything required for the installation, you can press the `Begin Installation` button to start installing {PRODUCT}. This will take you to xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-progress[Configuration and Installation Progress]. Note that as the text below this button says, nothing will be written to your hard drive before you press this button. You can press `Quit` at any point; this will discard all changes you made in the installer so far and reboot the system. +Once you configure everything required for the installation, you can press the `Begin Installation` button to start installing {PRODUCT}. This will take you to xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-progress[Configuration and Installation Progress]. Note that as the text below this button says, nothing will be written to your hard drive before you press this button. You can press `Quit` at any point; this will discard all changes you made in the installer so far and reboot the system. diff --git a/modules/install-guide/pages/_partials/install/WelcomeSpoke.adoc b/modules/install-guide/pages/_partials/install/WelcomeSpoke.adoc index 0c283e8..60ec200 100644 --- a/modules/install-guide/pages/_partials/install/WelcomeSpoke.adoc +++ b/modules/install-guide/pages/_partials/install/WelcomeSpoke.adoc @@ -16,7 +16,7 @@ The language you select on this screen will be used during the installation, and One language is pre-selected by default on top of the list. If network access is configured at this point (for example, if you booted from a network server instead of local media), the pre-selected language will be determined based on automatic location detection using the GeoIP module. Alternatively, if you used the [option]#inst.lang=# option on the boot command line or in your PXE server configuration, this language will be selected by default, but you will still be able to change it. -After you select your language and locale, click `Continue` to confirm your selection and proceed to xref:Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. +After you select your language and locale, click `Continue` to confirm your selection and proceed to xref:install/Installing_Using_Anaconda.adoc#sect-installation-gui-installation-summary[Installation Summary]. [NOTE] ====