@duffy @gnokii Hey! Are these alright?

PNG

SVG

oh yes, why I did not get a mail alert about this. Can we push them I need to moderate and awarding the badges reminds ppl to submit

but the numbers seem to be not centered

so tomorrow the contest ends and its not pushed yet

@gnokii I think this isn't pushed because the artwork isn't approved. I noticed that you stated that the numbers are off center.

@duffy @riecatnor @tanvi can we get approved art?

@gnokii when you this is pushed, if you will send me the list of FAS ids I can use a script on the backend to award the badge for you to make it easier.

@gnokii I think this isn't pushed because the artwork isn't approved. I noticed that you stated that the numbers are off center.
@duffy @riecatnor @tanvi can we get approved art?

I can approve to ;)

@gnokii when you this is pushed, if you will send me the list of FAS ids I can use a script on the backend to award the badge for you to make it easier.

ooh thats interesting

@gnokii I think this isn't pushed because the artwork isn't approved. I noticed that you stated that the numbers are off center.
@duffy @riecatnor @tanvi can we get approved art?

I can approve to ;)

Good to hear. When you've got the updated images, ping me and I'll try to push ASAP.

Reminder the badge for the voting needs to be there when the voting is open so there is just until 31st time left!

@gnokii let me know when you have the fixed images that don't have the numbers off-center.

@bex I've pushed the badges, but haven't created the entries on the admin panel. Once images are fixed, we need to push the replacement.

@sayanchowdhury happy to let you drive this ticket since you know where you stopped. Thank you for helping @gnokii here.

Hi, I am an Outreachy applicant
I would like to contribute to this task.
Can I know how to proceed

Hi @nagamalli thanks for your interest in this ticket! Take the final badge SVGs from ticket 583 (link below) and update the numbers to say 31. Keep everything else the same. Please do designs for F32 and F33 as well so we can get ahead for this round and the next. Thanks!

https://pagure.io/fedora-badges/issue/583

Reminder to: check png export size, upload SVG and PNG for review
More info: https://docs.fedoraproject.org/en-US/badges/design-badges/

@riecatnor As you said I had tried one of the design with F31.If it was fine with all measurements and as per the design rules.
I will share the whole svg's of F32&F33 also.

Once have a look at the below design if any changes let me know!

I Designed F32 & F33 also.Once have a look and let me know if any changes?
Was it make a contribution.Let me know:)

Thanks in advance.

Hi @nagamalli, it looks like some stuff got changed on the text. Refer to the PNGs here to see what they should look like: https://pagure.io/fedora-badges/issue/583

Make sure to include the outlines/strokes from the original as well as keep the text centered.

Thanks!

Hi @riecatnor
I made some changes as per your suggestions.Here I am uploading samples of 32&33.If these are fine ,I will send the remaining svg's also.
Once have a look:)

Thanks in advance:)

Hi @nagamalli take a look at these:

https://badges.fedoraproject.org/badge/keepin-fedora-beautiful-f28
https://badges.fedoraproject.org/badge/def-keepin-fedora-beautiful-f28
https://badges.fedoraproject.org/badge/nuancier-f28

The lettering should look exactly the same.
The F32 with the check mark looks good, it just needs to be centered
the F32 without the check mark needs the "32" to match the one above, and to be centered
The 33 for the supplemental wallpapers, the stroke needs to be heavier I think and it needs to centered

Thanks!

Hi @riecatnor ,Once have a look at these designs:)

I have made changes as per your suggestions..! If these 32&33 are fine ,I will share the remaining.

Thank you:)

Hi @nagamalli please upload the svgs. Thanks!

Yeah,Sure!

HI @nagamalli something is still off.. I dug deeper and found that the F28 files are incorrect with the export size but of course the artwork is still valid. See screenshot:

I did a comparison of F28, the template, and yours. The text in yours is still off, and adjustments will need to be made when bringing the old artwork into the template.

I wish you luck! Thanks for your persistence!

On Fri, 20 Mar 2020, 5:14 am Marie Nordin, pagure@pagure.io wrote:

riecatnor added a new comment to an issue you are following:
``
HI @nagamalli something is still off.. I dug deeper and found that the F28.
files are incorrect with the export size

I think I exported the correct dimensions of 256*256 at 96dpi and one more
thing i want to convey about the alignment, I hope I aligned in the centre
as 28. I think based on the number ,it was looking not yet centered for you. And still if it was not centered ,can you suggest me how can I keep it centered:).

but of course the artwork is still valid. See screenshot:

![Screenshot_from_2020-03-19_19-27-55.png](/fedora-badges/issue/raw/file=
s/0becb2b2552da7dc641298f5ed9e5afe2781ef90ddc6aaed65f36032389f8f2b-Screensh=
ot_from_2020-03-19_19-27-55.png)

I did a comparison of F28, the template, and yours. The text in yours is
still off, and adjustments will need to be made when bringing the old
artwork into the template.

Yeah,I forgot to change the text into bold ,while adjusting,I will modify now.
Thanks for your patience throughout guiding me through this:)

![Screenshot_from_2020-03-19_19-30-44.png](/fedora-badges/issue/raw/file=
s/c4fde471a0d54d72f8242d07646c6f3bb5b8764329a2534dc012951eb240f870-Screensh=
ot_from_2020-03-19_19-30-44.png)

I wish you luck! Thanks for your persistence!

Here i am sending the modified svg and png files.Once have a look.
Hope I have done right at this time.
Thank you:)

To reply, visit the link below or just reply to this email
https://pagure.io/fedora-badges/issue/686 Ch

Hi @nagamalli sometimes even if it is aligned in the center technically (meaning if you used align and distribute), you will need to adjust manually to be centered visually. For this one, you can refer to the old design to see how it is done.

Great, I look forward to seeing it with the bold text :)

Thanks!

Here i am attaching all the files i did.

I think alignment also i adjusted manually only as per the Ticket
https://pagure.io/fedora-badges/issue/583 you have given me as reference.

Yeah if i use the alignment tool, I won't get the right alignment right as
technically which you said before.

Once have a look.If there any changes remaining i am ready to change No
Problem:)

Thank you:)

Regards:
Naga Malleswari.

On Sun, 22 Mar 2020 at 19:53, Marie Nordin pagure@pagure.io wrote:

riecatnor added a new comment to an issue you are following:
``
Hi @nagamalli sometimes even if it is aligned in the center technically
(meaning if you used align and distribute), you will need to adjust
manually to be centered. For this one, you can refer to the old design to
see how it is done.

Hope I have done right this time,I adjusted manually only.if it's not
aligned i will check again.

Great, I look forward to seeing it with the bold text :)

Yeah I changed this time:)

Thanks!
``

To reply, visit the link below or just reply to this email
https://pagure.io/fedora-badges/issue/686

Hi @nagamalli - I don't see the new files, please re upload, thanks :)

Sure..!

hi @nagamalli

A couple things:

• For the F33 badges, why is the drop shadow gone from the middle? I tried to open the SVGs but they were acting strangely.
• Also when I opened the pink badge, I could see it was not on the template. You will need to move that one into the template.
• For the pink badge, the number still needs to move to the left a bit on both

Thanks!

Hope i have done right this time for the pink badge.
if this is fine i will send all pink badges in this way.!

Thank you!

Here I adjusted the pink f33 badge!

Since this ticket is quite old, and we are about to release F36, I checked in with the Design team about the status of the supplemental wallpapers. I've been told they would like to get things kicked off again for F37.

Let's adjust the requirements here, please create updated art for F37, F38, & F39.

<Issue #832 commented here by mistake>

OOPS! my mistake! this is not #832 issue!

I am so sorry @riecatnor

Keeping that aside, I would like to work on this issue. Can you please assign this to me?

Hi @nekonya3 feel free to submit something here!

@riecatnor please check:

@riecatnor by "updated art" did you mean that I need to create entirely new graphics? Or is the work that I have done above the requirement?

(Also, if you feel something is misaligned, please inform.)

Hi @nekonya3 nice work! You have followed the requirements, which was to update the current art with the 37, 38, 39 :) Some notes:
- The badges that have the blue ring are exported at an incorrect size, make sure they are 256x256 pixels
- Otherwise, these look good!

Oops! My bad! Here are the corrected ones @riecatnor :

Looks good! Setting to approved