Learn more about these different git repos.
Other Git URLs
== Deadline ==
Deadline for design to be sent to printer 19th June
Deadline for items to be shipped and ready to hand out 24th June
If you can, please provide us with example photos of items that are similar to the result you're looking for
Will drops strips as shown with arrows in image https://pravins.fedorapeople.org/fudcon/strips-gate.png
'''If you need printer recommendations, please include that in the ticket Include any text or content needed *No, we will not write your brochure for you'''
Yes
26-28 fudcon.in
'''Size requirements, can be standard paper size or width and height'''
For apparel or products
Apparel or product type flex
Print or embroidery print
Print area size (printer can provide this)
2*15 foot
attachment 2x15-ideas.png
Okies, here are a few ideas -- i'm leaning to the 1st one (from the left), with the 3rf one (from the left) coming second. The 3rd one from the left will be the hardest to get looking right because of the layout of each letter on a different "line" [[Image(2x15-ideas.png, 100%)]]
These two banners will go on two sides of this gate[1]. Do you think 1 and 2 could go on either side? i.e. 1 goes on the right and 2 goes on the left, or the other way around.
[1] http://www.infinitecourses.com/admin/RelatedImages/Institutes/634945537958034153_MIT%20School%20of%20Management%20%28MITSOM%29%20Entrance.JPG
attachment gate-mockup.jpg
I think that might work!
here is a super quick mockup of it:
[[Image(gate-mockup.jpg, 100%)]]
If you agree, i can start getting these ready for print too.
I assume the specs are similar to the other ones:
--ryanlerch
Thank looks awesome. The specs are same here, but extra bleed on the bottom and top of about 2 feet. We might need to fold the bottom in some way to attach weights to them so that the banners won't sway. The top of the banner may have to be folded around the railings on top in some way too, so extra bleed on top and bottom would be useful.
The sides could have a standard 5 inch bleed.
attachment bleedmockup.png
Quick mockup to confirm the bleed dimensions https://fedorahosted.org/design-team/attachment/ticket/387/bleedmockup.png
so the final PDF will have the dimensions of 34 x 228 inches
That looks correct, thanks!
Note that the label in the bleed mockup bottom bleed is wrong -- it says "2 feet (12 inches)" but the bottom bleed is 2 feet (24 inches). Just in case you pass that on to the printer.
attachment 2x15-left.pdf
attachment 2x15-right.pdf
Okies, here are the two print-ready PDFs:
https://fedorahosted.org/design-team/attachment/ticket/387/2x15-left.pdf
https://fedorahosted.org/design-team/attachment/ticket/387/2x15-right.pdf
they are 24in*180in CMYK PDFs version 1.5 with text converted to paths, and the following bleeds:
making the final PDF dimensions 34in * 228in
attachment 2x15-left.sla
attachment 2x15-left.svg
attachment 2x15-right.sla
attachment 2x15-right.svg
And here are the sources. The SVGs are the vectors that are imported into scribus to create the SLAs then colour changes done in Scribus.
https://fedorahosted.org/design-team/attachment/ticket/387/2x15-left.sla
https://fedorahosted.org/design-team/attachment/ticket/387/2x15-right.sla
https://fedorahosted.org/design-team/attachment/ticket/387/2x15-left.svg
https://fedorahosted.org/design-team/attachment/ticket/387/2x15-right.svg
cheers, ryanlerch
FUDCon is done and dusted, and this one was printed and delivered, so closing this one off!
Login to comment on this ticket.